Flagger-Mac Lite (CAN) Remote Pairing Issues

Synopsis: To operate flagger-mac's, you need to synchronize the remote control with the unit. However, you could encounter an issue while attempting to pair it. This article will show the steps used to help isolate the pairing issue.

• Level: Easy
• Time required: 5-10 minutes
• Additional equipment required: Spare remote 

1. Check if remote is already paired 

Note: After pressing a button on the remote, there should be LEDs flashing. There should also be a yellow LED that flashes on the receiver card. If it is not paired, follow this procedure to pair it. 

Figure 1 - Receiver card

2. If you are still unable to pair, try using another remote and attempt to pair it

Note: If another remote manages to pair, it means your original one is defective. If a second one still doesn't pair, the receiver card is defective.

If you require any additional help, contact our toll-free number at 1-888-488-7446 or email us at [e-mail]