How to Create, Save, Activate and Blank Messages on V-Touch Controller

Synopsis: When you receive a Ver-Mac message board, you will have the ability to create, save, activate and blank messages on your board via the V-Touch Controller.

  • Level: Beginner
  • Time required: 1-2 minutes
  • Additional equipment required: None

                                                                                                                                                              

1. Log into the V-Touch Controller via the Admin login

mceclip0.png

Figure 1 - Login screen

 

2. Go to Edit Msg

Note: Make sure you have Status OK at the bottom of the screen

mceclip7.png

Figure 2 - Edit Message

mceclip6.png

Figure 3 - Status OK

 

3. Enter your message

Note: If your message needs multiple pages, press the page with a + icon. It is important to know that MTO message boards must have a maximum of 2 pages with all caps letters.

mceclip3.png

Figure 4 - Created Message

Figure 5 - Adding pages

 

4. Activate your message by pressing the Play icon and double-tapping the created message

mceclip4.png

Figure 6 - Play button

mceclip5.png

Figure 7 - Message selection

mceclip8.png

Figure 8 - Message playing

 

5. To blank the sign, press the stop button

Figure 9 - Stop button

 

If you require any additional help, contact our toll-free number at 1-888-488-7446 or email us at support@ver-mac.com 

Was this article helpful? Let us know what you think!

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.