SP-3248-DSL Programming

Synopsis: Using the V-Touch Controller inside of the sign case of your speed wizard, you will have the ability to program the speed limit that will display on your sign in your work zone. The message on the bottom sign case will vary depending on the speed captured.

• Level: Easy
• Time required: 5 minutes
• Additional equipment required: None

1. Open the controller and use the + or - icon to adjust your speed

Note: The speeds will be adjusted in 5 MPH intervals

Figure 1 - Adjusting the speeds

2. Press the Play icon to display the speed limit

Figure 2 - Play icon

Note: Use the chart below to pick the message you want to play depending on speed limits.

Figure 3 - Speeds & conditions

If you require any additional help, contact our toll-free number at 1-888-488-7446 or email us at [e-mail]