How to Pair two Flagger-Mac Radio Units

Synopsis: If your Flagger-Macs have radio antennas, you will have the ability to pair them using the Units Pairing option on the touch screen. This article will cover the steps to do that.

• Level: Easy
• Time required: 2 minutes
• Additional equipment required: None

In duo radio mode, two Flagger-Macs communicate together to safely support the work of one or more flaggers. Each Flagger-Mac has a number that corresponds to a button on the wireless remote (see figure 1 below).

Figure 1 - Remote & unit number

1. Log into the touch screen of the secondary unit and press Options, then Units Pairing

Figure 2 - Unit Pairing

2. Press Edit and change the unit to Secondary. It should now be ready to be discovered

Figure 3 - Edit

Figure 4 - Setup

Figure 5 - Changing the unit to secondary

Figure 6 - Secondary unit now discoverable

3. Go back to the Primary Unit, scan for the other Flagger-Mac, select it and press Apply to pair them together

3.1. If you have multiple Flagger-Macs and aren't sure which one is which, you can identify them with the HE01 number that is on a sticker on the top-right corner of the touchscreen

Figure 7 - Scan

Figure 8 - Unit found & apply button

Figure 9 - Touch screen serial number (example)

Your Flagger-Macs should now be paired. If you are encountering any issues, please click here for troubleshooting.

If you require any additional help, contact our toll-free number at 1-888-488-7446 or email us at [e-mail]