Flagger-Mac Programming (Duo Radio Mode)

Synopsis: Once your Flagger-Mac remote is paired and the unit is ready to use, you will need to activate it. There are two possible options: solo mode or duo mode. This article will cover duo mode.

• Level: Easy
• Time required: 5 minutes
• Additional equipment required: None

In duo radio mode, two Flagger-Macs communicate together to safely support the work of one or more flaggers. Each Flagger-Mac has a number that corresponds to a button on the wireless remote (see figure 1 below).

Figure 1 - Remote & unit number

1. Log into the touch screen of the secondary unit and press Options, then Units Pairing

Figure 2 - Unit Pairing

2. Press Edit and change the unit to Secondary. It should now be ready to be discovered

Figure 3 - Edit

Figure 4 - Setup

Figure 5 - Changing the unit to secondary

Figure 6 - Secondary unit now discoverable

3. Go back to the Primary Unit, scan for the other Flagger-Mac, select it and press Apply to pair them together

3.1. If you have multiple Flagger-Macs and aren't sure which one is which, you can identify them with the HE01 number that is on a sticker on the top-right corner of the touchscreen. You can ignore the HE01 numbers in the following demo since it is a simulator. 

Figure 7 - Scan

Figure 8 - Unit found & apply button

Figure 9 - Touch screen serial number (example)

4. With your units paired, press the Play button

Figure 10 - Play button

5. Select Duo

Figure 11 - Duo mode

6. Use the remote to operate the gate

6.1. The number you press on the remote corresponds to the number in the top right corner of the touchscreen of the unit you are operating. 

Figure 12 - Remote & unit number

7. Use the middle button to lower the gate

Figure 13 - Middle button on remote

If you require any additional help, contact our toll-free number at 1-888-488-7446 or email us at [e-mail]