Flagger-Mac Programming (Solo Mode)

Synopsis: Once your Flagger-Mac remote is paired and the unit is ready to use, you will need to activate it. There are two possible options: solo mode or duo mode. This article will cover solo mode. 

• Level: Easy
• Time required: 1-2 minutes
• Additional equipment required: None

In solo mode, a flagger communicates only with his gate. In this configuration, it is not possible to communicate with 2 Flagger-Macs. Each unit is independent. 

Figure 1 - Solo mode

1. Log into the touchscreen and press the Play button

Figure 2 - Play button

2. Select Solo

Figure 3 - Activation type

3. Use the remote to operate the gate

3.1. The number you press on the remote corresponds to the number in the top right corner of the touchscreen of the unit you are operating. 

Figure 4 - Remote & unit number

4. Use the middle button to lower the gate

Figure 5 - Middle button on remote

If you require any additional help, contact our toll-free number at 1-888-488-7446 or email us at [e-mail]